Entry Point Not Found error message

Post here if you have problems getting Reality Factory running on your machine. Please make sure you have the latest DirectX installed as well as updated drivers for your video & sound card before posting...
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Entry Point Not Found error message

Post by LauraSeabrook »

I thought I'd try Reality Factory and have just downloaded RealityFactory075A and RealityFactory075C zip files, then installed / updated them. Seem to be having problems running RF.

First I got a message saying "can't find dinput8.dll". I downloaded a copy of this and now I get an error message that says "Entry Point Not Found: The procedure entry point GetRawInputDeviceInfoW could not be located in the dynamic link library USER32.dll". Now I do have a copy of this in /system32, so I don't understand what's wrong.

I'm running WIN 2000 Pro, and updated my Direct X before installing the software.
Laura Anne Seabrook
Jay
RF Dev Team
Posts: 1232
Joined: Fri Jul 08, 2005 1:56 pm
Location: Germany

Post by Jay »

I am sorry but it might be your operating system, i don't know if RF runs on Windows 2000... probably it doesn't.

The error you get means that it cannot find some function inside the file,basically this means that RF wants another version of the file. I think this has to do with the operating system - windows 2000.

I however know for sure that RF works on WindowsXP.
Everyone can see the difficult, but only the wise can see the simple.
-----
User avatar
Juutis
Posts: 1511
Joined: Thu Jan 12, 2006 12:46 pm
Location: Finland

Post by Juutis »

I however know for sure that RF works on WindowsXP.
It also runs on Win98 perfectly (at least it used to, a couple of years ago). I'm not sure about 2000 though.
Pain is only psychological.
User avatar
QuestOfDreams
Site Admin
Posts: 1520
Joined: Sun Jul 03, 2005 11:12 pm
Location: Austria
Contact:

Post by QuestOfDreams »

Currently I don't have a machine with Win2000 installed, just Win98SE and WinXP. I will try to get one set up with Win2000 for testing purpose. :?
Have you tried to google for that error? It seems that there is a problem with directx installs on Win2000. I think you have to replace the file d3d8thk.dll in the System32 folder manually.
User avatar
QuestOfDreams
Site Admin
Posts: 1520
Joined: Sun Jul 03, 2005 11:12 pm
Location: Austria
Contact:

Post by QuestOfDreams »

Did a bit of research... Look in your DX redistribution and see if you can find d3d8thk.dll and d3d8thk.w2k. If you find these replace your current copy of d3d8thk.dll with the d3d8thk.w2k version and change the .w2k to .dll. Hope that helps...
User avatar
Anonymu$
Posts: 77
Joined: Sun Aug 06, 2006 2:51 pm
Location: Lithuania

Post by Anonymu$ »

isnt rf 0.75B required?


( :oops: if not _ _ _ )
:)
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Post by LauraSeabrook »

Thanks for the responce.

It's funny, but I tried RF briefly when I still ran WIN98SE and there wasn't that problem - sometimes "upgrading" is a backwards step!

I found more about this problem in the TechZonez forums and a copy of d3d8thk.w2k to download over at Annoyances.org (couldn't find the DirectX cab file involved). Just copied it over the top of d3d8thk.dll, and am about to reboot to see if it works.
Laura Anne Seabrook
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Post by LauraSeabrook »

No, it didn't work. :(

I checked /SYSTEM32 just in case the file was restored, but it's the w2k copy I put there.
Laura Anne Seabrook
User avatar
darksmaster923
Posts: 1857
Joined: Wed Jan 03, 2007 10:32 pm
Location: Huntington Beach, California, USA

Post by darksmaster923 »

i used to rf fine on win2k. have you tried updating drivers? what directx do you have?

bunches of links
http://www.techzonez.com/forums/archive ... 17699.html
http://forums.belution.com/en/directx/000/000/49s.shtml
Herp derp.
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Post by LauraSeabrook »

I used the Web Installer at the MS site to install the latest version ( 9.18 ) of DirectX. After reading one of the links, it seems that what I need to do is uninstall that, and reinstall DirectX 8.1. I'll give that a try.

.
.
.

Tried that, and got the same error message. :?
Laura Anne Seabrook
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Post by LauraSeabrook »

This is starting to get really annoying. After reading the other posts and forums referenced here, I've tried several solutions and none of them work. I've:
  • 1) replaced d3d8thk.dll with d3d8thk.w2k
  • 2) ditto with user32.dll
  • 3) Removed the Direct X update I had (9.18 ) and installed DirectX 8.1
Suggestions please. I can't believe that RF works on 98 and XP and not 2000 - what did 2000 users do, upgrade to XP just to run it? :cry:
Laura Anne Seabrook
User avatar
scott
Posts: 1151
Joined: Tue Jul 05, 2005 1:59 am
Location: United Kingdom

Post by scott »

to be honest i myself dont know anyone who had win 2000, i had win 3.1, 95, 98, xp home and now xp media center eddition, it was the same with my grandad, he had 98 and then went to xp
*GD*
User avatar
zany_001
Posts: 1047
Joined: Fri Mar 02, 2007 8:36 am
Location: Aotearoa

Post by zany_001 »

Welcome to the forums :D !!!!! :D :D :D

Have you tried downloading rf again,or else if you have the money,look into upgrading,or just use 98.
Once I was sad, and I stopped being sad and was awesome instead.
True story.
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

Post by LauraSeabrook »

zany_001 wrote:Have you tried downloading rf again,or else if you have the money,look into upgrading,or just use 98.
Not yet - but wouldn't it be the same, or should I use a different download source.
.
.
.
I downloaded and installed it again, with the same result. :cry:
Last edited by LauraSeabrook on Thu Apr 26, 2007 1:17 pm, edited 1 time in total.
Laura Anne Seabrook
User avatar
LauraSeabrook
Posts: 8
Joined: Wed Apr 25, 2007 11:22 am
Location: Hunter valley, New South Wales

98 -> 2000

Post by LauraSeabrook »

scott wrote:to be honest i myself dont know anyone who had win 2000, i had win 3.1, 95, 98, xp home and now xp media center eddition, it was the same with my grandad, he had 98SE and then went to xp
Fair enough. I stuck out Win98 until Decemeber last year, partly because I didn't want to spend money upgrading, and partly because (more or less) it did what I want. However, after MS discontinued support for it, I noticed that new programs started having versions that would run in later windows, but not 98SE. :(

After I got (very very cheaply) WIN2000 Pro, I could run a whole slew of free software (like Sketchup) that I couldn't before. It was also (on the whole) more stable). My hardware is a bit dated, so there was no point in going to XP or beyond, as it would be too slow. Just recently I installed a dual boot of SUSE 10.2, just to have a play with it. That version of Linux (with KDE) seems at least as capable as 2000. Don't suppose you ever thougt of doing a port to Linux (just joking - I don't think that Linux even runs an equivalent of DirectX, but I could be wrong)? :P
Laura Anne Seabrook
Post Reply