CONFUSING-I NEED HELP

Post here if you have problems getting Reality Factory running on your machine. Please make sure you have the latest DirectX installed as well as updated drivers for your video & sound card before posting...
kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 3:25 am

SO i made a level on RF and each time it would work when i would test it out on RF but one time i tried it out and it all worked like, the charecter choosing then the name part works but when it loads the level it crases like nothing ever happeded... then i made a new level just for test sake and i just made another and made it a single small room with one player and it worked...but since that made no sence to me so i went to the actual program of RF and clicked new game and what was weird was that all the players i chose the same crash happeded except when i chose the robot and human which then howed a tutorial but i dont care about that as much as why my level wont work... it is really weird because i works untill it loads lever i will put some screen shots to show what happens

my level


if you know what the problem is but dont want to comment plz plzplz email me @ karankeshav@canada.com asap thx

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 3:47 am

sry my pics didn't work so i will explain it
it starts off with my level
then i click build and it works
then it opens the program RF and lets you choose the charecter and the name... then it loads then shuts down...
if you need more info leave your email and i will send you the series of screenshots... of what happens... plz help if you can thx

User avatar
paradoxnj
RF2 Dev Team
Posts: 1328
Joined: Wed Mar 01, 2006 7:37 pm
Location: Brick, NJ
Contact:

Re: CONFUSING-I NEED HELP

Post by paradoxnj » Fri Aug 07, 2009 5:25 am

Did you read the manual and ebook before using the software? These show the correct way to use the software. It seems as if you may be missing some entities in your level which are well documented in the manual. Post your RealityFactory.log file.
Many Bothans died to bring you this signature....

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 7:39 am

what log file i downloaded this program on a site and used their tutorialso it all worked fine till i went a little inprov... but only after some time...
and by missing entitys i havethe enviroment, and the player start and setup located on the map... so what can i be missing thx for posting

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 7:42 am

and no i didn't read the e-book sry ... i mean i m trying to use alot of softwears to make a game(lik i m only 13 years old) and RF seemed the esiest...
so if u could maybe take a look at it lik maybe i sent send it to you somehow... thx :D

Jay
RF Dev Team
Posts: 1232
Joined: Fri Jul 08, 2005 1:56 pm
Location: Germany

Re: CONFUSING-I NEED HELP

Post by Jay » Fri Aug 07, 2009 10:57 am

If you dowloaded this program from 'a site' then we can not guarantee that you have the newest version and that everything works as we say here. Please first install RealityFactory 0.76 from the downloads page (on this page) and then update to 0.76.1. On the downloads page there is also the ebook which will satisfy almost all your needs (it was written for an outdated version of RF, but the stuff inside still works) Only recently an user was experiencing problems and nobody knew what the problem was. It turned out the user didn't use the most recent version of RF and that the problem was solved by installing RF0.76 and then updating to RF0.76.1.

If you didn't download RealityFactory here, where did you download it? Maybe they also have good tutorials for everyone here...


The log file we mean is RealityFactory.log which is located in the RealityFactory main folder.
Everyone can see the difficult, but only the wise can see the simple.
-----

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 7:29 pm

THE SITE WAS ACTUALLY REALLY GOOD... and i m pretty sure i downloaded the .75 verision or whatnot but the site is called "http://www.stormthecastle.com/video-gam ... ctory1.htm" you should check it out because the link to downnload RF is also there... nvm the version i downloaded was RF0.75A... which might not be recent enough. Say i download the recent RF would my old level work because i spend over 4 hours working on it to make a massivily hard maze. thx

User avatar
bernie
RF Moderator
Posts: 1249
Joined: Tue Nov 15, 2005 10:07 am
Location: Ireland

Re: CONFUSING-I NEED HELP

Post by bernie » Fri Aug 07, 2009 8:14 pm

Say i download the recent RF would my old level work because i spend over 4 hours working on it to make a massivily hard maze. thx
Yes it will work in v 0.76.1

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Fri Aug 07, 2009 8:19 pm

oh and if this means anything this is what the log shows at the bottom when i click build and it compilies

Code: Select all

** BSP Compile Version: 15 
** Build Date/Time: Jan 31 2005,06:32:56
 --- Load Brush File ---
Num Solid Brushes      :    57
Num Cut Brushes        :     0
Num Hollow Cut Brushes :     0
Num Detail Brushes     :     0
Num Total Brushes      :    57
 --- Remove Hidden Leafs --- 
 --- Remove Hidden Leafs --- 
 --- Weld Model Verts --- 
 --- Fix Model TJunctions --- 
 --- CreateLeafClusters --- 
 --- Save Portal File --- 
 --- Create Area Leafs --- 
 --- Save GBSP File --- 
Num Models           :     1,     80
Num Nodes            :   110,   4840
Num Solid Leafs      :    48,   2880
Num Total Leafs      :   111,   6660
Num Clusters         :    63,    252
Num Areas            :     1,      8
Num Area Portals     :     0,      0
Num Leafs Sides      :   381,   3048
Num Planes           :   193,   3860
Num Faces            :   824,  29664
Num Leaf Faces       :  1025,   4100
Num Vert Index       :  3867,  15468
Num Verts            :  1100,  13200
Num FaceInfo         :    28,   1792
Num Textures         :    18,    936
Motion Data Size     :            40
Tex Data Size        :        875538
 --- Vis GBSP File --- 
Loading Portal File : c:\realityfactory\media\levels\rfeditpro1.GPF
NumPortals           :   208
Starting to Vis all Leafs
Collect Leaf Vis Bits for leaf 0
Collect Leaf Vis Bits for leaf 1
Collect Leaf Vis Bits for leaf 2
Collect Leaf Vis Bits for leaf 3
Collect Leaf Vis Bits for leaf 4
Collect Leaf Vis Bits for leaf 5
Collect Leaf Vis Bits for leaf 6
Collect Leaf Vis Bits for leaf 7
Collect Leaf Vis Bits for leaf 8
Collect Leaf Vis Bits for leaf 9
Collect Leaf Vis Bits for leaf 10
Collect Leaf Vis Bits for leaf 11
Collect Leaf Vis Bits for leaf 12
Collect Leaf Vis Bits for leaf 13
Collect Leaf Vis Bits for leaf 14
Collect Leaf Vis Bits for leaf 15
Collect Leaf Vis Bits for leaf 16
Collect Leaf Vis Bits for leaf 17
Collect Leaf Vis Bits for leaf 18
Collect Leaf Vis Bits for leaf 19
Collect Leaf Vis Bits for leaf 20
Collect Leaf Vis Bits for leaf 21
Collect Leaf Vis Bits for leaf 22
Collect Leaf Vis Bits for leaf 23
Collect Leaf Vis Bits for leaf 24
Collect Leaf Vis Bits for leaf 25
Collect Leaf Vis Bits for leaf 26
Collect Leaf Vis Bits for leaf 27
Collect Leaf Vis Bits for leaf 28
Collect Leaf Vis Bits for leaf 29
Collect Leaf Vis Bits for leaf 30
Collect Leaf Vis Bits for leaf 31
Collect Leaf Vis Bits for leaf 32
Collect Leaf Vis Bits for leaf 33
Collect Leaf Vis Bits for leaf 34
Collect Leaf Vis Bits for leaf 35
Collect Leaf Vis Bits for leaf 36
Collect Leaf Vis Bits for leaf 37
Collect Leaf Vis Bits for leaf 38
Collect Leaf Vis Bits for leaf 39
Collect Leaf Vis Bits for leaf 40
Collect Leaf Vis Bits for leaf 41
Collect Leaf Vis Bits for leaf 42
Collect Leaf Vis Bits for leaf 43
Collect Leaf Vis Bits for leaf 44
Collect Leaf Vis Bits for leaf 45
Collect Leaf Vis Bits for leaf 46
Collect Leaf Vis Bits for leaf 47
Collect Leaf Vis Bits for leaf 48
Collect Leaf Vis Bits for leaf 49
Collect Leaf Vis Bits for leaf 50
Collect Leaf Vis Bits for leaf 51
Collect Leaf Vis Bits for leaf 52
Collect Leaf Vis Bits for leaf 53
Collect Leaf Vis Bits for leaf 54
Collect Leaf Vis Bits for leaf 55
Collect Leaf Vis Bits for leaf 56
Collect Leaf Vis Bits for leaf 57
Collect Leaf Vis Bits for leaf 58
Collect Leaf Vis Bits for leaf 59
Collect Leaf Vis Bits for leaf 60
Collect Leaf Vis Bits for leaf 61
Collect Leaf Vis Bits for leaf 62
Total visible areas           :  1335
Average visible from each area:    21
FileName c:\realityfactory\media\levels\rfeditpro1.bsp
 --- Radiosity GBSP File --- 
Num Faces            :   824
Num Normal Lights   :     3
Num RGB only Lights   :     0
Num RGB Always Visible Lights   :     0
Num Suns with fallofftype 0 :     0
Skipping RWM Gouraud coloring 3867 RGB faces (Full Vis only)
.0.1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20
Light Data Size      : 294860
Num Light Maps       :   824
------------------------------
Compile successfully completed
Last edited by QuestOfDreams on Sat Aug 08, 2009 12:09 pm, edited 1 time in total.
Reason: Enclosed log in code tags

Jay
RF Dev Team
Posts: 1232
Joined: Fri Jul 08, 2005 1:56 pm
Location: Germany

Re: CONFUSING-I NEED HELP

Post by Jay » Fri Aug 07, 2009 10:02 pm

This is the compile log... We meant the "Realityfactory.log", which is a file in the Realityfactory folder (which is by standard C:\Realityfactory)
Everyone can see the difficult, but only the wise can see the simple.
-----

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Sat Aug 08, 2009 6:18 am

OHHH i think i found it but it didn't say "log file" anywhere but it look as it cause is the closest one to it... it is long tho...

Code: Select all

Searching for fullscreen driver

Initializing Game Shell...
-----------------------------------------------
--- Reality Factory 0.76                    ---
--- Build Date: May 25 2008, Time: 19:43:48 ---
--- For more Information, visit:            ---
---    http://www.realityfactory.info              ---
-----------------------------------------------

Parsed RealityFactory.ini file

Genesis3D Initialized

[INFO] VFS detected (not encrypted)...

Initializing Camera Manager...
Initializing User Input Subsystem...
[WARNING] File open attempt failed on type '9', file '.\keyboard.ini'
Initializing Audio Manager Subsystem...
Initializing CD Audio Manager Subsystem...
Initializing Midi Audio Manager Subsystem...
Initializing RF Menu Manager Subsystem...
Initializing Network...
Loading Menu.ini...
Parsing Menu.ini...
Loading Character.ini...
Initializing Menu
[WARNING] File open attempt failed on type '9', file '.\setup.ini'
Initializing Collision Manager Subsystem...
Initializing Network Manager Subsystem...
Initializing AVIFile Video Subsystem...
Launching Reality Factory Game Shell...
Entering CRFMenu::DoMenu()
Entering CRFMenu::ProcessMenu
Entering Windows Message Loop, Rendering Game Menu
Entering CRFMenu::ProcessMenu
Entering Windows Message Loop, Rendering Game Menu
Entering CRFMenu::ProcessMenu
Entering Windows Message Loop, Rendering Game Menu
Entering CRFMenu::ProcessMenu
Entering Windows Message Loop, Rendering Game Menu
Initializing Level: rfdemov1.bsp
Configuring Camera Defaults...
Initializing Entity Registry...
Initializing Terrain Manager...
Initializing Effects Manager...
Initializing Actor Manager...
Parsing Environment Setup Entity...
Initializing Model Manager...
Creating Player Avatar...
Loading Player Avatar...
Initializing HUD...
Initializing Damage Subsystem...
Initializing FixedCamera Manager Subsystem...
Loading Player Configuration...
Loading Attributes and Player Configuration from PlayerSetup.ini
Loading Environmental Audio
Parsing PlayerSetup Entity
Initialize Player Data
Parsing EnvironmentSetup Entity
Initializing Automatic Door Manager Subsystem...
Initializing Moving Platform Manager Subsystem...
Initializing Teleport Manager Subsystem...
Initializing MorphingField Effects Manager Subsystem...
Initializing 3d AudioSource Manager Subsystem...
Initializing Particle Effects Manager Subsystem...
Initializing Static Entity Props Subsystem...
Initializing Static Mesh Subsystem...
Initializing Soundtrack Toggle Subsystem...
Initializing Streaming Audio Manager Subsystem...
Initializing Video Texture Manager Subsystem...
Initializing Corona Manager Subsystem...
Initializing Dynamic Light Manager Subsystem...
Initializing ElectricBolt Manager Subsystem...
Initializing Procedural Texture Manager Subsystem...
Initializing Path Database...
Initializing Path Followers...
Initializing Rain Effects Manager...
Initializing Spout Effects Manager...
Initializing ActorSpout Effects Manager...
Initializing Floating Particle Effects Manager...
Initializing eChaos Effects Manager...
Initializing Flame Effects Manager...
Initializing ScriptPoint Manager Subsystem...
Initializing Pawn Manager Subsystem...
Initializing ChangeAttribute Manager Subsystem...
Initializing Countdown Manager Subsystem...
Initializing Trigger Manager Subsystem...
Initializing LogicHandler Subsystem...
Initializing Message Manager Subsystem...
Initializing Effect Manager Subsystem...
Initializing Weapon Manager Subsystem...
Initializing FirePoint Manager Subsystem...
Initializing Flipbook Manager Subsystem...
Initializing AreaCheck Manager Subsystem...
Initializing Foliage Manager Subsystem...
Initializing Tree Manager Subsystem...
Initializing PWXImage Manager Subsystem...
Initializing Shadow Manager Subsystem...
Initializing Decal Manager Subsystem...
Initializing WallDecal Manager Subsystem...
Initializing LevelController Manager Subsystem...
Initializing Attribute Manager Subsystem...
Initializing Explosion Manager Subsystem...
Initializing Explosion Subsystem...
Initializing ChangeLevel Manager Subsystem...
Initializing ScreenShake Subsystem...
Initializing ViewSwitch Subsystem...
Initializing Inventory Subsystem...
Initializing Liquid Subsystem...
Initializing Overlay Subsystem...
Initializing TextureMorph Subsystem...
Initializing CutScene Subsystem...
Initializing ActorMaterial Subsystem...
Initializing Armour Subsystem...
Initializing LiftBelt Manager...
Initializing CDSpotlight Manager...
Initializing CurvedSurfaces Manager...
Initializing WindGenerator...
Initializing Fonts...
Preparing to Launch Game...
CRFMenu::GameLoop() - Setup and Run Level
CRFMenu::GameLevel() - Entering Inner Game Loop
[ERROR] CGenesisEngine::BeginFrame failed
and yes i realised that there^^ it says it failed but if i download another version of generic 3d i cant link it to the version of RFEdit i m using

P.S. i tried the newer version of RF and it was way more (no offence to the creators) old and useless so plz can you help me with the version i am using(0.75A) thx
Last edited by QuestOfDreams on Sat Aug 08, 2009 12:08 pm, edited 1 time in total.
Reason: Enclosed log in code tags

User avatar
bernie
RF Moderator
Posts: 1249
Joined: Tue Nov 15, 2005 10:07 am
Location: Ireland

Re: CONFUSING-I NEED HELP

Post by bernie » Sat Aug 08, 2009 11:21 am

Looks like you have a leak. Surround the WHOLE of your level with a hollow box and try again.

User avatar
QuestOfDreams
Site Admin
Posts: 1520
Joined: Sun Jul 03, 2005 11:12 pm
Location: Austria
Contact:

Re: CONFUSING-I NEED HELP

Post by QuestOfDreams » Sat Aug 08, 2009 12:23 pm

Moved topic...

First, welcome to the forums. Second, you should have read this topic: viewtopic.php?f=2&t=3342 (and also this one viewtopic.php?f=2&t=1192 )
[ERROR] CGenesisEngine::BeginFrame failed
This error message usually indicates the usage of textures that are not a power of 2 in size and/or not square.
bernie wrote:Looks like you have a leak. Surround the WHOLE of your level with a hollow box and try again.
This is not the case as he would not get a successfully compiled level, if there was a leak.
if i download another version of generic 3d i cant link it to the version of RFEdit i m using
:?: I don't get what you're trying to do here. Everything that is needed is included in the main Reality Factory installer. The Genesis3D lib is linked statically against RF so you cannot use any other version of Genesis3D unless you recompile RF (furthermore RF uses the latest version of Genesis3D so it won't be wise to use a different one).
P.S. i tried the newer version of RF and it was way more (no offence to the creators) old and useless so plz can you help me with the version i am using(0.75A) thx
This makes absolutely no sense as RF 0.76.0 / RF 0.76.1 has all the features from the previous version and in addition several new features.

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Sat Aug 08, 2009 8:17 pm

qod thank you for your detailled reply but i dont get what i am suposted to do and the reason i said that about the 0.76.0/.1 is because all of the buttons are gray and the screen is different than i am used to... btw i am new at this so thank you but i require alot of assisstance :D sry but if you could explaiin what EXACTLY i could do it would be GREATLY appreciated THX

kkskeshava
Posts: 13
Joined: Fri Aug 07, 2009 2:30 am

Re: CONFUSING-I NEED HELP

Post by kkskeshava » Sun Aug 09, 2009 12:50 am

QOD yes i read those 2 link you included and sorry... i am not sure of what graphic card or what i am using,i have experimented didn't really do much...i have read the manual and there was no aid there on my problem... the version of RFEdit is 0.75.0A, my screenshots did not attach there was a problem so that was one of my drawbacks to this forum so after what i have tried it still will not function so please if possible can you describe what steps i should take from here THANK YOU

Post Reply