Problem with the liquid entity

Post topics regarding Level Building/Design and Entity Usage with Reality Factory
Post Reply
realgaming135
Posts: 87
Joined: Sun Sep 16, 2012 11:05 pm
Location: Denmark

Problem with the liquid entity

Post by realgaming135 »

Hi there.

When I add water to my level and use the liquid entity, and then use the Tintcolor funktion to color the water, something annoying happends. I compile my level and the air also gets colored. It should only be the water that is colored, but all the air above the water is also colored. So when I walk around on the ground, it looks like I am diving in the water. Does anyone know how to fix this?

Thanks :)
Without facts, a mystery is just a guessing game...
User avatar
steven8
Posts: 1487
Joined: Wed Aug 24, 2005 9:08 am
Location: Barberton, OH

Re: Problem with the liquid entity

Post by steven8 »

Make sure the brush you are using for water is not overlapping any other brushes. In fact, keep your water brush one texel away from adjoining brushes. I had a whole room become water once because the engine got 'confused'.

See if that helps.
Steve Dilworth - Resisting change since 1965!
realgaming135
Posts: 87
Joined: Sun Sep 16, 2012 11:05 pm
Location: Denmark

Re: Problem with the liquid entity

Post by realgaming135 »

Ok, thanks for the answer :)
Without facts, a mystery is just a guessing game...
User avatar
steven8
Posts: 1487
Joined: Wed Aug 24, 2005 9:08 am
Location: Barberton, OH

Re: Problem with the liquid entity

Post by steven8 »

No problem. Be sure you keep us posted on your progress.
Steve Dilworth - Resisting change since 1965!
realgaming135
Posts: 87
Joined: Sun Sep 16, 2012 11:05 pm
Location: Denmark

Re: Problem with the liquid entity

Post by realgaming135 »

of course :D
Without facts, a mystery is just a guessing game...
Post Reply