This didnt use to happen and it only happens on some levels
EDIT: okay now its happening b4 the logo...
Contents of RealityFactory.log:
[/quote]searching for fullscreen driver
RF crashes
-
CJD-D01071
- Posts: 5
- Joined: Fri Dec 09, 2005 4:58 pm
RF crashes
Whenever I test my game in RF, it just abruptly ends after the logo.
This didnt use to happen and it only happens on some levels
EDIT: okay now its happening b4 the logo...
Contents of RealityFactory.log:
This didnt use to happen and it only happens on some levels
EDIT: okay now its happening b4 the logo...
Contents of RealityFactory.log:
Last edited by CJD-D01071 on Fri Dec 09, 2005 5:09 pm, edited 1 time in total.
please post the contents of realityfactory.log.
Welcome to the forums!
Welcome to the forums!
RF2 site: http://realityfactory2.sourceforge.net/
RF2 tasks: http://sourceforge.net/pm/?group_id=179085
RF2 tasks: http://sourceforge.net/pm/?group_id=179085
-
CJD-D01071
- Posts: 5
- Joined: Fri Dec 09, 2005 4:58 pm
it just says serching for fullscreen driver
EDIT:
Here's my graphics card if that helps...
I tried it again and I got that error "Genesis3D engine creation failure
" so I tried changing the driver... and it STILL DOESNT WORK!!!!!!!!
HELP MEEEEEE!!!!!!!!!!!
EDIT AGAIN:
I tried it again and this time it wouldnt even compile because "gbsplib.dll" was not found OMG WTF IS GOING ON??
Someone help me please! This is only getting worse as time goes on...
EDIT AGAIN:
Now it just crashes alot omg HELP!
EDIT AGAIN (will it ever stop?)
"ERROR: failed to create actor def" << IN EDITOR
"Face with no normal!" << IN BOX THINGY AT BOTTOM
EDIT AGAIN FOR THE LAST TIME:
I restarted RF and everything is working perfectly fine now............
EDIT:
Here's my graphics card if that helps...
EDIT AGAIN:INTEL(R) EXTREME GRAPHICS 2 FOR MOBILE REPORT
Report Date: 12/09/2005
Report Time[hr:mm:ss]: 12:34:57
Driver Version: 6.14.10.3732
Operating System: Windows NT* 5.1.2600 Service Pack 2
Default Language: English
DirectX* Version: 9.0
Physical Memory: 246 MB
Min. Graphics Memory: 8 MB
Max. Graphics Memory: 64 MB
Graphics Memory in use: 12 MB
Processor: x86 family 6 Model 9 Stepping 5
Processor Speed: 1495 MHZ
Vendor ID: 0x8086
Device ID: 0x3582
Device Revision: 2
* Output Devices Connected to Graphics Accelerator *
Active Notebook Displays:1
I tried it again and I got that error "Genesis3D engine creation failure
" so I tried changing the driver... and it STILL DOESNT WORK!!!!!!!!
HELP MEEEEEE!!!!!!!!!!!
EDIT AGAIN:
I tried it again and this time it wouldnt even compile because "gbsplib.dll" was not found OMG WTF IS GOING ON??
Someone help me please! This is only getting worse as time goes on...
EDIT AGAIN:
Now it just crashes alot omg HELP!
EDIT AGAIN (will it ever stop?)
"ERROR: failed to create actor def" << IN EDITOR
"Face with no normal!" << IN BOX THINGY AT BOTTOM
EDIT AGAIN FOR THE LAST TIME:
I restarted RF and everything is working perfectly fine now............
Sounds weird! I had a problem like that before. It worked after Restarted the computer.
Jonas
Focused, hard work is the real key to success. Keep your eyes on the goal, and just keep taking the next step towards completing it. If you aren't sure which way to do something, do it both ways and see which works better. - John Carmack
Focused, hard work is the real key to success. Keep your eyes on the goal, and just keep taking the next step towards completing it. If you aren't sure which way to do something, do it both ways and see which works better. - John Carmack
Error covered in rf faq
http://terrymorgan.net/rffaq.zip
Demos, tuts
http://terrymorgan.net/download.htm
http://terrymorgan.net/rffaq.zip
Demos, tuts
http://terrymorgan.net/download.htm