Page 1 of 1
RF becames too slow when opening the demo
Posted: Sun Jul 30, 2006 12:34 am
by leolios
I donwloaded RF and the 0.75 update and installed it. When I opened it, a black screen flashed and RF shutdowned inmediately. I changed the Reality Factory.ini to make resolution to 1024x768, window the program, render by software and use OpenGL. I also changed the d3d24.ini by moving the value of bpp to 16 and the zbuffer to 2.
When I started RF, the Genesis 3D logo showed out and was too slow, also the RF logo and the demo too. I´ve got a Pentium 3 800 hz Cpu,
with 192 RAM, a 32 RAM video card and I don´t understand why it is too slow.
Posted: Sun Jul 30, 2006 12:35 am
by leolios
sorry the processor is 800 mhz
Posted: Sun Jul 30, 2006 7:57 am
by Jay
I do not think it's a good idea to set the zbufferd to 2, because that would mean it uses only 2bits for the zbuffer....
here is my d3d24.ini:
Code: Select all
[d3d24]
Bpp = 16
ZBufferD = 16
BBufferCount = 1
CompressTextures = 0
FSAntiAliasing = 0
ExtraTextures = 0
NoVsync = 1
Async = 0
DoNotWait = 1
I also use the dircetx driver because it has better features.
Also, welcome to the forums and to REalityFactory!
Posted: Sun Jul 30, 2006 12:37 pm
by steven8
Yes, use the directx driver. The opengl has not been kept up. You'll see better results. Let us know how it goes and Welcome to Reality Factory!!
Posted: Mon Jul 31, 2006 9:40 pm
by Spyrewolf
Pentium 3 800 hz Cpu,
with 192 RAM, a 32 RAM video card
and I don´t understand why it is too slow
not to put you off or anything but this is probally the bare minimum need for RF, i would usually recommend at least
1.0 - 1.5 processor
256MB Ram
64MB vidcard
anything less than that should run RF but it will be a bit of a struggle, it still is do-able though when i first joined on i had a 400mhz machine with 128MB ram and 8bit vid card
......
Posted: Tue Aug 01, 2006 1:50 am
by steven8
Oh my. In my haste I think I read that as 3.8 and naturally thought ghz. I'd say Spyrewolf is right. That is right on the edge. Things will be quite slow.