Page 1 of 1
Walldecals on the floor
Posted: Mon Jul 21, 2008 10:51 am
by Lynkyn
Hello!
Why I cant put walldecals on the floor? for example, I put the parametres (orientation) 0, 180, -90, the arrow looks down, and, when I complile the level, the decal is on the walls or on the top
It is a bug? or the ''wall'' decals cannot be put on floors?
Thanks
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 10:54 am
by metal_head
Well,I don't know why,but it's called WALL decal maybe it only works on walls
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 11:36 am
by Lynkyn
I want a ''floordecal''
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 4:27 pm
by metal_head
well,you can use a transparent brush.
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 4:32 pm
by Lynkyn
Lynkyn want a decal on the flooor....Lynkyn furious! XD
Well, maybe I must to do this (transparent brush) but I am annoyed because de decals of the projectiles can be on the floor...
Maybe I put a pawn who shoot a projectile who has the decal I want!!
Too complicated for a ''Parking'' decal XDDDDDDD
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 5:13 pm
by QuestOfDreams
Please read the manual.
First, never, NEVER use the mouse to rotate the direction arrow. You'll never get things to work again if you do. Instead, use the entity editor to change the values of Angle. To place the decal on a wall set X and Z to 0 and Y to 0, 90, 180 or 270. The arrow will point in the correct direction and you can move the entity to get the correct spot (where the arrow intersects the wall). To place it on the floor set Y to 90, Z to 0 and X to -90. The arrow will point down and you can move the entity to the proper location. To place on ceilings set Y to 90, Z to 0 and X to 90. The arrow points up correctly. Using any other values will give strange results as the direction arrow points off in whatever direction it wants and the decal can end up in a totally different position.
Re: Walldecals on the floor
Posted: Tue Jul 22, 2008 6:22 pm
by metal_head
First, never, NEVER use the mouse to rotate the direction arrow. You'll never get things to work again if you do. Instead, use the entity editor to change the values of Angle
I have always used the mouse to rotate the arrow and I haven't had any problems with that...
probably a bug
Re: Walldecals on the floor
Posted: Wed Jul 23, 2008 11:24 am
by Lynkyn
